15-03-2023, 11:43 AM
(15-03-2023, 11:37 AM)teaserteam Wrote: Do not advise pple to do the same as shown in yr YouTube. Their voltage is 110 v. ours is 220 volt. Depending on yr luck and circuit design , quite likely u will get a shock when touching the metal part. Do it without powerUsing pencil might not work long. AN led consumes about 1 to 5 mA depending on design and brightness. At 3 volt, tt is around 3 to 15 mW power going thro’.
aiptasia is now in my ignored list.
Omi.. Thank you for bumping up the message.